Optical BPSK Modulation and Demodulation using Opti System Simulator
Rashmi Rekha Mishra1, Karmila Soren2

1Rashmi Rekha Mishra*, Department of I & E, College of Engineering and Technology, Bhubaneswar (Odisha), India. 
2Karmila Soren, Department of I & E, College of Engineering and Technology, Bhubaneswar (Odisha), India. 
Manuscript received on December 18, 2021. | Revised Manuscript received on December 24, 2021. | Manuscript published on December 30, 2021. | PP: 1-4 | Volume-9 Issue-1, December 2021. | Retrieval Number: 100.1/ijies.C1045126321 | DOI: 10.35940/ijies.C1045.129121
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Published By: Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Fibre optics deals with study of propagation of light through transparent dielectric waveguides. The fibre optics is used for transmission of data from point to point location. Fibre optic systems currently used are most extensively as the transmission line between terrestrial hardwired systems. The carrier frequencies used in conventional systems had the limitations in handling the volume and rate of the data transmission. Greater the carrier frequency larger is the available bandwidth and information carrying capacity. This paper explains about Optical BPSK, where input data is converted to BPSK data which is optically modulated by optical modulator and transmitted through an optical fibre cable. The transmitted data and received data are compared in the end. 
Keywords: Optical Fibre, BPSK, MZ Modulator, PIN Photodiode, 3R Regenerator.