Automatic 12-Volt Battery Charge Controller for Telecommunication Systems
Sylvester Tirones1, Raj Kumar2
1Sylvester Tirones, Researcher, Department of Applied Physics, Electronics and Instrumentation, Papua New Guinea University of Technology, Lae, Papua New Guinea.
2Raj Kumar, Professor, Department of Electrical Engineering, Papua New Guinea University of Technology, Lae, Papua New Guinea.
Manuscript received on 28 April 2025 | First Revised Manuscript received on 02 May 2025 | Second Revised Manuscript received on 05 May 2025 | Manuscript Accepted on 15 May 2025 | Manuscript published on 30 May 2025 | PP: 25-31 | Volume-12 Issue-5, May 2025 | Retrieval Number: 100.1/ijies.E110412050525 | DOI: 10.35940/ijies.E1104.12050525
Open Access | Editorial and Publishing Policies | Cite | Zenodo | OJS | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Everyday electronic applications rely on electric energy to perform work. The growing use of electrical appliances has significantly increased electricity demand. In remote areas where electronic systems are deployed, DC power is essential, making batteries vital for energy storage. Rechargeable batteries are widely used as backup power sources in applications requiring continuous operation, but without appropriate chargers, they become ineffective. Telecommunication systems, crucial for transmitting and receiving information, depend on reliable power. A battery charger matched to the battery’s charging and discharging specifications ensures uninterrupted operation. The proposed charger design is simple and cost-effective, using terminal voltage to monitor the state of charge (SoC) of a 12-volt lead-acid battery. This is achieved with a voltage divider circuit calibrated to switch the charger on or off at set voltage levels. The design includes detailed experimental work and component-level implementation, supported by software-based simulation to validate that the charger maintains control within the required charging and discharging limits. Results confirm that the charger operates safely within the specified SoC range, protecting battery health. Thus, this automatic 12-volt battery charge controller is vital for telecommunication systems, especially during main power disruptions. It ensures continued operation and enhances reliability in remote setups such as telecommunication stations, weather monitoring systems, data acquisition units, and other electronics-based remote monitoring applications.
Keywords: Battery Charge Controller, 12-Volt Lead Acid Battery, State of Charge (SoC) Monitoring, Automatic Battery Charging, Voltage Divider Circuit, Relay-Based Control, Telecommunication Systems.
Scope of the Article: Electrical and Electronics